Installation; Specifications; General; Dimensional Drawing - Teac LS-M100 Bedienungsanleitung

Installation

Installing speakers correctly is extremely important. The
volume of low frequencies will seem to change accord-
ing to the positions where the speakers are installed. Test
various installation positions to find the best places for
maximizing the capabilities of the speakers.
• Place the active unit to the left and the passive unit
to the right.
• Place the speakers so that they form an equilateral
triangle with the listening position.
LEFT: Active unit
• Install each speaker so that the top of its woofer is
at ear height.
• Do not install speakers near mirrors, glass or other
surfaces that reflect sound. Do not place anything
between the speakers and the listening position.

Specifications

General

8 Maximum effective output (distortion: 10%)
14W + 14W
8 Speaker units

3-inch (76.2mm) woofer

0.5-inch (12.7mm) tweeter

8 Enclosure
Bass reflex type
RIGHT: Passive unit
8 Frequency response
80 Hz–22 kHz
8 Crossover frequency
8 kHz
8 External input jacks
RCA pin jacks, stereo mini jack
8 Input impedance
50 kΩ
8 Power

AC adapter (PS-P1524E)

Input voltage: AC 100–240 V (50–60 Hz)
Output voltage: DC 15 V
Output current: 2.4 A
8 Power consumption
6.2 W
8 Dimensions
110 × 170 × 138 mm (4 3/8" × 6 3/4" × 5 1/2")
(width × height × depth, excluding protrusions)
8 Weight
Active unit: 1.1 kg (2 1/2 lb)
Passive unit: 1.0 kg (2 1/4 lb)

Dimensional drawing

110mm
• Illustrations in this manual might differ in part from
the actual product.
• Weight and dimensions are approximate.
• Specifications and external appearance might be
changed without notification to improve the product.
138mm
7