Configuration
Note
The "Configuration" menu is used to manage all
device settings.
Warning
Ensure that the date and time are set correctly.
IMPORTANT:
Subsequent changes to the settings can lead
to data loss!
Ensure a data backup has been made in good
time beforehand.
Overview
Menu
Setting
General
Language, video, time, date,
mouse pointer, password, time
zones and other settings
Network
Required network settings
(manual IP, DHCP, PPPOE,
DDNS etc.) and network status
overview
Alarm
Settings for the alarm I/Os of
the network camera
Live cast
Display settings and assign-
ment of the event output
Warning
Behaviour of the device in ex-
ceptional cases
(HDD full, network disconnect-
ed etc.)
User
Adding and changing users,
assigning authorisation rights
Note
Pay attention to the instructions in the corre-
sponding sections.
General
"General" tab
Language
Resolution
Time Zone
Date Format
System Date/Time Date and time
Mouse Pointer
Speed
Page
Enable Wizard
82
Enable ID Authen-
tification
83
83
Activating LED
status bar
85
88
Activate remote
88
access
Configuration
Setting
Language on the OSD
Resolution on the monitor
GMT (Greenwich Mean Time)
MM-DD-YYYY, DD-MM-YYYY,
YYYY-MM-DD
Set on the scroll bar (left =
low speed; right = high speed)
Box ticked:
Wizard will appear after restart of
the device.
Box not ticked:
In order to enter a menu no pass-
word has to be entered. At access
by network the password has to
be entered.
Box ticked:
Password must be entered in or-
der to use the menu.
Box not ticked:
The LED status display is deac-
tivated.
Box ticked:
The LED status display glows blue
when the recorder is on.
Box ticked:
Access for remote configuration is
activated for technical support.
87