Bang & Olufsen BeoPlay A8 Handhabung

For table placement, mount the
rear feet on your BeoPlay A8
and make sure the front feet
are mounted. For wall bracket
placement, remove all feet. If
you do not wish to use
BeoPlay A8 with a docked
iPod /iPhone /iPad
® ® ®
dock with the enclosed lid.
Place BeoPlay A8 on a flat, stable
surface and connect it to the mains
supply. Your iPod/iPhone/iPad is
charged when docked.
How to handle BeoPlay A8
replace the
Mount and dismount the dock
If you do not want to use the dock,
you must carefully lift it off. Insert
the enclosed lid to cover the gap.
To remove the lid, you must insert
a thin flat-headed instrument, such
as a screw driver, into the hole and
detach it. To avoid scratches, a
cloth can be wrapped around the
instrument while you insert it. Do
not use force.
Adjust docking
You must adjust the part of the
docking station that supports your
iPod/iPhone/iPad by turning the
round part (left or right). Align the
front of the iPod/iPhone/iPad with
the front of BeoPlay A8.
Dock and undock
To dock and undock your iPod/
iPhone/iPad safely you must use a
parallel upwards or downwards
movement aligned with the part of
the docking station that supports
your device.
Adjust the part of the docking
station that supports your iPod/
iPhone/iPad.
Never use force and never tilt your
iPod/iPhone/iPad when you dock/
undock.
*iTunes version 10.1 (Mac or PC)
1
or higher is required.