Radio Mode; Sleep Operation; Snooze Function - Denver CR-418 Bedienungsanleitung

ALARM button to turn it off. The alarm icon will disappear to
indicate the alarm is disarmed.

RADIO MODE

Note: Ensure that the FM antenna is completely unrolled and extended
for best FM reception.
1. Press the ON/OFF button (10) to turn the unit on.
2. Use the Tune + (8) or Tune – (4) button to select the desired FM
station. If you press and hold the Tune +(8) or Tune –(4) button for
one second, the release, the unit will automatically scan to the
next broadcasting station.
3. Press the ON/OFF button (10) to turn the radio OFF.
TO SET / RECALL THE RADIO PRESETS
1. Press the ON/OFF button (10) to turn the unit ON.
2. Use the Tune +(8) or Tune –(4) button to select the desired FM
station.
3. Press the SET.MEM/ M + button (9); "P02" will blink in the display.
4. Press the SET.MEM / M + button (9) again to set the preset.
5. Repeat steps 2 through 4 to set more presets.
6. The unit can preset 10 stations totally for FM.
7. When "P01-P10" is blinking, press the Tune+ (8) or Tune-(4) button
to select the preset number.
8. When recalling preset stations, press SET.MEM / M + button(9) to
select the preset number.

SLEEP OPERATION

When listening to radio, press Snooze / Sleep button (1) to enter sleep
mode. You can just adjust the sleep timer from 90 mins to 10 mins by
pressing the Snooze / Sleep button (1). The unit will automatically turn
off after the selected time.

SNOOZE FUNCTION

When the alarm rings, press Snooze button (1) to suspend the alarm
& to activate the snooze function, Alarm will stop & will ring again 9
minutes later. Press SNOOZE key again, alarm will be suspended
again, another 9 minutes later the alarm will ring again and so on until
the next alarm rings.