Storage - Silvercrest SRR 3.7 A1 Bedienungsanleitung

5) Replace the shaver unit
6) To attach it, turn the catch marked with arrows in the opposite
direction to the arrow markings so that the shaving head mount-
ing can no longer be removed.
7) Remove loose hairs from the shaver with the brush
8) Replace the shaver unit
into place and is seated firmly.
■ Clean the housing and the mains adapter
NOTE
If ...
... the shaving result is noticeably poorer, ...
–
... you have to the shave the same spot repeatedly to
–
achieve a good result, ...
... the shave takes much longer than usual, ...
–
... there is visible damage to the shaving heads, ...
–
... the shaving heads should be changed.
Please contact the Service Centre if you want to order shaving
heads.

Storage

CAUTION! MATERIAL DAMAGE!
Never store the shaver in the case
charging. Risk of overheating!
■ Always replace the protective cap
you are not using the appliance.
■ Store the cleaned and dried appliance and its accessories in the
supplied case
■ Store everything in a clean, dust-free and dry place.
│ GB │ MT
■ 76
.
on the shaver. Ensure that it snaps
.
with a damp cloth.
while the appliance is
on the shaver unit
SRR 3.7 A1
.
when