Igniting The Fuel; Cleaning And Care; Disposal - FLORABEST HG02020 Montage-, Bedienungs- Und Sicherheitshinweise

˜ Igniting the fuel
WARNING! RISK OF BURNS!
Igniting using petrol or spirits, which are highly
flammable, can cause the uncontrollable build
up of heat . Therefore, only use safe burning
materials such as firelighters . The grill must be
placed on solid, stable ground while it is being
used .
Tip: To guarantee perfectly smoldering
charcoal, we recommend using a chimney
starter (not included in the scope of delivery) .
Use quality products with DIN approval, such
as DIN approved charcoal, DIN approved
briquettes or DIN approved firelighters .
Stack up some of the charcoal or briquettes
on the charcoal rack
indirectly, fill the intermediate space between
the charcoal dividers
fire bowl with fuel . When grilling indirectly,
8
the intermediate space between the charcoal
dividers should remain empty .
18
Place one or two firelighters on the layer of
charcoal or briquettes . Light this / these with
a match .
Allow the firelighters to burn for 2 to
4 minutes . Then, refill the fire bowl
wood charcoal or briquettes, bit by bit .
A white layer of ash should form on the
fuel after 15 to 20 minutes . This means that
the perfect cooking temperature has been
achieved . Distribute the fuel equally in the fire
bowl using a suitable metal tool .
8
Mount the greased grill rack
grilling .
. When grilling
7
and the wall of the
18
with
8
and start
6
˜ Cleaning and care
Allow the product to cool all the way down
before cleaning it .
B e sure the charcoal is completely burnt out

and cooled down before removing the ashes
and storing the product away .
Do not use strong or abrasive solvents or
scouring pads, as these will damage the
surfaces and leave marks .
Never pour cold water directly over the
charcoal after grilling to extinguish these . The
product may otherwise be damaged . Use old
ash, sand or water mist .
Empty the cold ashes and clean the product
regularly, preferably after every use .
Remove the grill rack
thoroughly with dishwater . Then dry it off
thoroughly .
Remove loose deposits on the product with a
wet sponge .
Dry with a soft, clean cloth . Do not scratch the
surfaces when drying off .
Generally clean the inside and surfaces with
warm soapy water .
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities .
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product .
and clean it
6
GB/IE/NI 7