Chauvet DJ Intimidator Spot Duo ML Schnellanleitung Seite 6

Intimidator™ Spot Duo QRG
Master Auto
Programs
Master Auto
4-Head
Program
Master Auto
2-Head
Program
The Master Auto built-in programs control the actions of two Intimidator™
Spot Duo units linked together by DMX data connection. A single
Intimidator™ Spot Duo (the "master") controls the actions of another
Intimidator™ Spot Duo (the "slave"). Configure the Master Auto programs in
conjunction with the Slave modes as follows:
The Master Auto 4-Head program allows all 4 heads of two linked Intimidator™
Spot Duo units to operate in unison. The master unit will be set to operate in the
M--4 program, while the slave unit will be set to operate in either Son1 or Son2
mode.
Configure the units as indicated below.
Master unit:
1. Press <MENU> repeatedly until M--2 or M--4 shows on the display.
2. Press <UP> or <DOWN> to select M--4.
3. Press <ENTER>.
Slave unit:
1. Press <MENU> repeatedly until Son1 or Son2 shows on the display.
2. Press <UP> or <DOWN> to select Son1 or Son2.
·
Select Son1 for 100% synchronized actions.
·
Select Son2 for a delayed show with all 4 heads in the same direction.
3. Press <ENTER>.
The Master Auto 2-Head program allows a single Intimidator™ Spot Duo to
control the actions of another Intimidator™ Spot Duo. The master unit will be set
to operate in the M--2 program, while the slave unit will be set to operate in either
Son1 or Son2 mode.
Configure the units as indicated below.
Master unit:
1. Press <MENU> repeatedly until M--2 or M--4 shows on the display.
2. Press <UP> or <DOWN> to select M--2.
3. Press <ENTER>.
Slave unit:
1. Press <MENU> repeatedly until Son1 or Son2 shows on the display.
2. Press <UP> or <DOWN> to select Son1 or Son2.
·
Select Son1 for 100% synchronized actions.
·
Select Son2 for the same show with both units, but the actions of the
slave are in the opposite direction of the actions of the master.
3. Press <ENTER>.
6
EN