Verifying Proper Installation (Windows 98/98 Se Os) - Belkin F5U219 Bedienungsanleitung

17. Check the "CD-ROM drive" box. Click "Next".
18. The Windows OS will locate the driver for "Belkin USB 2.0 Hi-Speed Host
Controller". Click "Next".
19. The Windows OS will now install the F5U219 enhanced host controller
driver. Click "Finish".
20. After installation of the USB host controllers, the Windows OS will detect
"USB Root Hub" and automatically install the required driver support.
This will repeat for each of the two USB OHCI host controllers.
Installation of the PCI Card is now complete.

Verifying Proper Installation (Windows 98/98 SE OS)

Check the "Windows Device Manager" to confirm that your PCI Card has
been properly installed.
1. Right-click on "My Computer" and select "Properties".
2. Select the "Device Manager" tab.
3. Click on the plus sign (+) next to "Universal Serial Bus Controllers".
The "Device Manager" list will now include two "NEC USB Open Host
Controller" entries, one "Belkin USB 2.0 Hi-Speed Host Controller" entry,
and two additional "USB Root Hub" entries.
Installation
EN
5 5