• Slide the On/off switch (2) to the ON position to switch on the Bluetooth remote
release. The control light (1) begins to flash green (slowly).
• This means the Bluetooth remote release is searching for a Bluetooth connection.
• Open the Bluetooth settings on your terminal device and wait until Hama BRS2
appears in the list of Bluetooth devices found.
• Select Hama BRS2 and wait until the Bluetooth remote release is listed as
connected in the Bluetooth settings on your terminal device. The control light (1)
begins to flash green (quickly).
• You can now use the Bluetooth remote release.
6.2. Automatic Bluetooth connection (after successful pairing)
Note
• Make sure that your Bluetooth-capable terminal device is on and Bluetooth is
activated.
• Make sure that your Bluetooth-capable terminal device is visible for other
Bluetooth devices.
• For more information, please refer to the operating instructions of your terminal
device.
• The Bluetooth remote release remains connected to the Bluetooth device it was
last paired with.
• Slide the On/off switch (2) to the ON position to switch on the Bluetooth remote
release. The control light (1) begins to flash green (slowly).
• After 3–5 seconds, the Bluetooth remote release automatically connects to the
device.
• You can now use the Bluetooth remote release.
5