Display Modes - Denver DAB-24 Bedienungsanleitung

STORING AND RECALLING STORED STATIONS
You can store up to 4 of your favourite stations to the preset; this will enable you to get access to your
favourite station at a touch of a single button.
1. To store a preset, first tune to your desired station, then press and hold your preferred PRESET button
(1 - 5) until the display shows "Preset # stored". (F.12)
2. To recall a preset station, press the PRESET button (1 - 5) that you have stored.
3. If you press a preset that hasn't been allocated a station, the display will show "Preset # empty".

DISPLAY MODES

Every time you press the INFO button, the display will cycle through the following display modes:
Radio text
The broadcaster can include scrolling text that displays information about the present programme. If the
information is not available, the display will show "<No RT>".
Progarmme type
This describes the style of the programme that is being broadcast. If the information is not available, the
display will show "<No PTY>".
Signal strenght
The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer the bar
will be from left to right.(F13)
Time and date
The time and date will be automatically updated by the broadcasted information; there is no need to set the
clock manually. In the unlikely event that no clock information is received, the display will show "<Time/
Date>".
Frequency
The frequency of the present station will be displayed.
Audio mode
In FM mode, the display will show if the station being received is mono or stereo.
UK - 5