REV Ritter . 0514949555 Bedienungsanleitung Seite 9

GB
Illustrations
Receiver

Transmitter

Existing door bell system

Existing door bell sensor

Operation as radio-controlled door chimes
I
Operation with existing door bell system (circuit diagram)
II
Operation with existing door bell sensor (circuit diagram)
III
Battery compartment for 3 x 1.5V batteries LR 14 Baby C (not included)
➀
Battery compartment for 2 x 1.5V batteries LR03 Micro AAA (included)
➁
Coding switch
➂
Chime selector switch
➃
Tone switch (4-fold adjustable)
➄
Volume control (4-fold adjustable)
➅
Key button
➆
Marking panel
➇
LED flashlight
➈
Dear customer,
We would like to thank you for purchasing our radio-controlled door chimes. They offer you enor-
mous product advantages and are easy to operate and install. Please read the following operating
instructions carefully before installing and using the door chimes.
Contents
1. General instructions
2. Technical data
3. Battery operation
4. Coding
5. Chime selection
6. Chime Function
7. Integration into an existing door bell system
8. Marking panel
9. Important instructions
10. Troubleshooting
11 . Cleaning
12 . Warranty
13. Battery
1. General instructions
• The radio chimes are only designed for use with the corresponding batteries.
• This set of radio chimes consists of a transmitter and a receiver. Other transmitters (art. no.
0504444555, white) can be used with this set.
• The chimes offer you the possibility of building up a door bell system without any wiring. It can
also be used as supplement to an existing door bell system.
ANL_0514949555.indd 10
(a) 2-tone chimes
(b) 3-tone chimes
(c) Westminster chimes
15.11.2011 10:13:55