Timer - Silvercrest SIKP 2000 E3 Bedienungsanleitung

NOTE
► If no button is pressed within a 2-hour period, the appliance will switch to
standby mode even if the hob
for more than 2 hours or keep food warm for more than 2 hours, adjust the
desired time using the timer (see the section "Timer"). You can use this to set
times of up to three hours.
► After switching off into standby mode, the appliance's fans continue to run
for a while to dissipate the heat. As long as the temperature of the hob
remains above 60°C, "
7) Pull the mains plug out of the mains socket if you no longer wish to use the
appliance.

Timer

You can preselect a time period between 1 and 180 mins, after which the
hob will switch off.
1) Start the cooking procedure (in power or temperature mode) as explained
above.
2) Press the "Timer"
indicator lamp
3) Set the desired time:
When you press the "+" button
you press the button "-"
start if no entries are made within 5 seconds.
NOTE
► Keep the "+"
The display
time remaining until switch-off.
After the time elapses, you will hear a beep and the hob
automatically. The appliance switches back to standby mode.
│ GB │ IE │ NI │ CY
■ 12
" w ill be shown on the display
button . The display
lights up.
, the time decreases by 1 minute. The timer will
or "-" button pressed for faster increments.
now alternately shows the set power level/temperature and the
is still working. If you wish to cook a dish
reads " ". The "Timer"
, the time increases by 10 minutes. When
.
will switch off
SIKP 2000 E3