Perel CFANT01N Bedienungsanleitung Seite 5

5. Assembly
This fan can only be used if completely and correctly assembled.
1. Assemble the foot base and place underneath the foot. Fix with the screws.
2. Lock the power cord into the guide.
6. Operation
1. Place the fan on a flat, stable and non-slippery surface.
2. Make sure the device is switched off. Connect to the mains.
3. Switch on the device by pressing one of the speed switches.
4. Switch off and unplug from the mains after use.
V. 02 – 15/01/2018
CFANT01N
switch position
0
1
2
3
5
speed
off
low speed
medium speed
high speed
©Velleman nv