Web Application Manager Log-In; Live Interface; Live Display - Monacor AHR-40 Bedienungsanleitung

Fig. 7-3
Reminder: If the ActiveX control is not downloaded success-
fully, please check if your browser's safety level or firewall set-
ting is too advanced. Please run IE  Tools  Internet options
 Internet Custom level  Enable the options (details please
refer to the below fig. 7-4).
Fig. 7-4
If running the web application for the first time, you need
about one minute to finish download and install the ActiveX
controls, please wait patiently.
Note: If you want to use the updated ActiveX at one computer
which you already login before, please delete the old ActiveX and
click [Start  Run] and then input the command characters:
"regsvr32/u HiDvrOcx.ocx", then login again.

7.2 Web Application Manager Log-in

1) After ActiveX controls installation, please input user name,
password and client port; and select <Main stream> or
<sub stream>, and then allow you tick-select <Open All
Channels Preview>.
2) Now you click [Log-in] button, and then you are allowed to
access a remote DVR and monitor live video images using
Web browser anytime from virtually anywhere.
3) Noted that defaulted password is empty. System allows
Administrator to set new password as per instructions in
chapter 7.3.3.6 [System set  User Configuration] menu.
Fig. 7-5

7.3 Live interface

After successful logging-in web manager, you will enter into
the Live interface shown as fig. 7-6.
Fig. 7-6
Menu bar on top include [Live], [Replay], [Configuration], [Path
Configuration] and [Logout] options.

7.3.1 Live Display

After running the Web Application Manager on your local PC,
system will be defaulted to enter into <Live> interface shown
as fig. 7-6. On the left side of the menu, the following icons
are available to perform functions for each channel:
Clicking the icon will close / open the current channel's
live mode.
Record icon: record will be saved to a specified position
after starting record.
Snapshot function: allow you capture the live images
and save it to a specified position. The image should be
saved as *.bmp format.
As an alternative, right-click the Live window to call up the
respective function.
Show bit rate: Right-click the Preview window and tick-select
the option to show current bit rate.
The icons of the tool bar located at the bottom of the screen
provide the following functions:
Allow you open all the <live> channels.
Allow you close all the <live> channels.
47