Belkin OmniView E Serie Bedienungsanleitung Seite 10

Installation
Keyboard, Monitor, and Mouse Connections
Connecting the Console
Step 1
Connect the monitor to the E Series KVM Switch. Using the cable that is
attached to your monitor, connect it to the HDDB15 female port on the rear left
side of the E Series KVM Switch labeled "Console". (Refer to diagram below.)
Step 2
Connect the PS/2 keyboard to the PURPLE keyboard port on the front of the
KVM Switch. (Refer to diagram below.)
Step 3
Connect the PS/2 mouse to the GREEN mouse port on the front of the KVM
Switch. (Refer to diagram below.)
You are ready to connect your computers.
EN-8