SELFSAT SNIPE DRIVE DiSEqC 1. Bedienungsanleitung Seite 15

5
Place main unit on the top of fixed plate.
Put back the mounting plate on the silicone
applied and make 2holes (2mm) with power drill
7
Assemble mounting plate using 2 M4x20 screws
9
Apply silicone around the mounting plate
11
Remove the masking tape and get dry
14
6
Apply silicone on the holes
8
Re-apply silicone to cover tightened screws
10
Tidy the area silicone applied
12
The image you will see