Factory Reset; Test Mode; Auto Test; Manual Test - Chauvet Professional Maverick MK2 Profile Handbuch

Operation

Factory reset

To restore the Maverick MK2 Profile to factory default settings, do the following:
1. Navigate to the
2. Use <UP> or <DOWN> to select Factory Settings, or touch the display where it says Factory
Settings.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory
settings), or touch the display where it says the desired option.
5. Press <ENTER>.

Test Mode

Auto test

To perform an auto test of the Maverick MK2 Profile functions, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says Test .
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Auto Test, or touch the display where it says Auto Test.
5. Press <ENTER>.

Manual test

To test the functions of the product manually, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says Test.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Manual Test, or touch the display where it says Manual Test.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP> or <DOWN> to select the function to test, or touch the display where it says the
desired function.
7. If using the buttons instead of the touchscreen, press <ENTER>.
8. Change the value of the tested function with one of the following methods:
• Type the desired value using the number pad that shows on the touchscreen display.
• Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to increase or decrease the value.
9. Press <ENTER>.

System Information

All information about the current status of the Maverick MK2 Profile is available through the product's
Information menu. To view this, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Information, or touch the display where it
says Information.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select from Fixture Information (shows firmware version, running
mode, starting address, etc.), Fan Information (shows speed of the head fans in rpm), Error
Information (shows any errors or No Error!), or Channel Information (shows the current value
of all signal input channels), or touch the display where it says the desired option.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to scroll through the information.
Maverick MK2 Profile User Manual Rev. 3
Settings menu.
Home Screen
Home Screen
Home Screen
shows on the display. Press <ENTER>.
shows on the display. Press <ENTER>.
shows on the display. Press <ENTER>.
Page 22 of 209