System Startup; System Software - Clevo W840SN Ausführliches Benutzerhandbuch

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack on the right
of the computer, then plug the AC power cord into an
outlet, and connect the AC power cord to the AC/DC
adapter.
6. Use one hand to raise the lid/LCD to a comfortable
viewing angle (do not exceed 127 degrees); use the
other hand (as illustrated in
base of the computer (Note: Never lift the computer by
the lid/LCD).
7. Press the power button to turn the computer "on".

System Software

Your computer may already come with system soft-
ware pre-installed. Where this is not the case, or
where you are re-configuring your computer for a
different system, you will find this manual refers to
Microsoft Windows 8.1.
4
Figure 1) to support the
Figure 1
Opening the Lid/
LCD/Computer with
AC/DC Adapter
Plugged-In
127
ﾟ

Shut Down
Note that you should always shut
your computer down by choosing
the Shut down command in Win-
dows (see below). This will help
prevent hard disk or system prob-
lems.
Click Settings in the Charms Bar
(use the Windows Logo Key
+ C key combination to access the
Charms Bar) and choose Shut
down from the Power menu.
Or
Choose Shut down or sign out >
Shut down from the context menu
(use the Windows Logo Key
+ X key combination to access the
context menu).