Krampouz Samba Bedienungsanleitung Seite 17

Installation
Installation
Place the appliance on a flat, rigid surface, slightly away from the edge and at least 1m
away from any wall and any heat-sensitive element. Do not use on a heat-sensitive
surface.
For optimum user comfort, the appliance must be located between 85 and 95 cm from
the ground. The Krampouz Plein Air cart (KHEA05) is specially designed for Krampouz
planchas. With two wheels, you can move your plancha around easily.
Adjustment
The setting conditions for this appliance are written on the information plate affixed to
the side of the appliance.
This plancha works with the types of gas shown in the "Specifications" table (p.5).
Properties of gas cylinders that can be used with the Samba plancha
Gas type
Quantity of gas
External
diameter (mm)
Total height
(mm)
Use one of the commercial butane (G30) or propane (G31) cylinders described in the
above table, with the appropriate safety pressure regulator (28 mbar for butane and 37
mbar for propane) and conforming with standards NF EN 12864 / NF EN 16129 / NF M
88-781.
When the appliance is operating ensure that the gas cylinder is as far away as possible
from the heat source, placing it next to the appliance on completely level ground.
Change the gas cylinder in a well-ventilated location away from any fire source such as
naked fames, cigarettes or heat sources, etc. Check the leak-tightness once the cylinder
has been replaced.
KRAMPOUZ may not be held liable for damage caused to objects or persons resulting
from improper installation or use of the appliance.
6
(kg)
300
365/280
Butane
10 13
300/311 306
478/585 560
-
- 17
Propane
5 13
300 310
355/280 615