Using; Settings; Using Of Videophone; Setting On The Roadside Panel - Extel WEVP 2100 E Installations- Und Bedienungsanleitung

6. USING

a. Settings
4 settings can be adjusted from the side of the monitor :
1- Ringer volume and cut-off
2- Loudsparkers Volume
3- Contrast
4- Brightness
b. Using of videophone
• A call from the outdoor station button triggers the ringer and causes the monitor to light up for about thirty
seconds. Once the visitor has been identified, press on the key to establish communication.
N.B. : Pressing this key just once is enough to establish communication with the outdoor station.
• Once communication is over, either wait for the delay time (about 1,30 minutes) or turn the monitor off using
the key.
• To resume communication and bring the image back, press on the then key
• The catch or mechanism is activated using the or key.
c. Setting of the roadside panel
• Setting of the sound level for the speaker of the roadside panel.
In case of a whistle (Larsen effect), adjust the loudspeaker's volume in order to eliminate the trouble.

7. TECHNICAL SPECIFICATIONS

a. Monitor
(VPMN 2100 E SER.R2)
• Reference : 812102
• Power supply : 17 V
• Consumption : 12 W
• Screen : 10 cm
• Measurements (mm): 235x190x35
b. Power supply
• Adaptor : 100-240 V , 50/60Hz ; 17 V , 1400 mA
If the power supply cable has to be cut, ensure that the colour coding of the wires is maintained when reconnecting.
c. Camera
(VPPL 2100 E SER.R2)
• Reference : 822102
• C-MOS video camera
• Viewing angle:92°
• Operating temperature (approximate): from -10°C to + 45°C
• Luminous sensitivity : Approx. 0,5 Lux (on night, use an additional lighting)
• Measurements (mm): 235x100x40
CFI EXTEL WEVP 2100 E SER.R2 - 10/2011 - V1
NL