SD SERIES BENCH SCALE
Product Features & Operation
Two Button Keypad
• ON/ZERO Off : A short press turns on the scale when it is off. When the scale
is on, a short press zeroes the scale, and a long press turns the scale off.
• UNITS Cal : A short press changes the weighing unit and weighing mode.
A short press initiates countdown during Dynamic Weighing Mode.
A long press initiates the calibration process.
Display Window
Large 7-Segment Numeric Characters:
•
shown using 4 digits including negative sign and decimal places. Prompts
for calibration and possible error conditions are also shown using these
digits.
Stable Reading Indication
•
the display to indicate when the reading is stable.
Weighing Unit Indication
•
right side of the display.
Dynamic Weighing Mode Indication
•
selected unit during this mode.
Figure 5. Indicator Panel Controls.
: A
: The weighing unit selected appears on the
Weight (mass) values are
*
will appear in the lower left corner of
: A • will flash next to the
Units
Cal
On/Zero
Off
EN-5