Overheating Safeguard; Hotkey Function; Program Settings - CASO DESIGN AF300 Bedienungsanleitung

5.2 Overheating safeguard

5.3 Hotkey function

5.4 Program settings

caso AF300
The Air Fryer has an overheating safeguard installed. The
safeguard is activated once the temperature reaches its
threshold. If this happens, let the appliance cool down by
following these steps:
1. Shut down the appliance by pressing the Off button.
2. Give the appliance ample time to cool down.
The Air Fryer has a default setting of 350 °F (175 °C) and 10
min.
1. Put the plug (3) into the socket. You will hear a beep and the
on/off button (11) appears.
2. Keep the on/off button pressed for 3 sec. The digital display
will switch on. In the display you will see "350 °F" (175 °C)
and "10 min".
3. Press the blinking start/pause (12) button.
4. The Air Fryer will switch on and the time in the display will
run down. When the Air Fryer is done you will hear a beep.
The display will turn off and the hot Air Fryer will enter
standby mode.
PLEASE NOTE
► If you do not press the start button, the hot Air Fryer will
switch to its standby mode after +/- 1 min.
The Air Fryer has a default setting of "350 °F" (175 °C) and "10
min". You can adjust this manually.
Adjusting the temperature:
1. Put the plug (3) into the socket. You will hear a beep and the
on/off button (11) appears.
2. Keep the on/off button pressed for 3 sec. The digital display
will switch on.
3. Press UP (10a) to increase the temperature. The maximum
temperature is 400 °F (205 °C).
4. Press DOWN (10b) to decrease the temperature. The
minimum temperature is 140 °F (60 °C).
19