Symbols Used; Documentation; Bea 810/840/850; Instructions For Use - Bosch BEA 810 Instandsetzungsanleitung

1.

Symbols used

1.1

Documentation

Pictograms linked with the key words Danger, Warning
and Caution are warnings and always indicate an imme-
diate or potential hazard to the user.
Danger!
Immediate danger that could cause serious
personal injury or death.
Warning!
Potentially dangerous situation that could
cause serious personal injury or death.
Caution!
Potentially dangerous situation that could
cause personal injury or damage to property.
!
Important – warns of a potentially hazardous situa-
tion in which the BEA 810/840/850, the test sample
or other object in the vicinity could be damaged.
In addition to these warnings, the following symbols are
also used:
i
Info – In addition to these warnings, the following
symbols are also used.
¶
Single-step procedure – instructions for a procedure
that can be completed in just one step.
? Intermediate result – an intermediate result is dis-
played during a procedure.
"
Final result – the final result is displayed at the end
of the procedure.
1.2

BEA 810/840/850

Disposal
Old electrical and electronic devices, including
cables and accessories or batteries must be
disposed of separate to household waste.
Robert Bosch GmbH
Symbols used | BEA 810/840/850 | 11 BEA 810/840/850 | 11
2.

Instructions for use

2.1

Important information

Important information on copyright, liability and war-
ranty provisions, as well as on equipment users and
company obligations, can be found in the separate
manual "Important notes on and safety instructions
for Bosch Test Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the BEA 810/840/850 and must always be
heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Bosch Test Equipment". These
instructions must be carefully studied prior to start-up,
connection and operation of the BEA 810/840/850 and
must always be heeded.
2.3

Servicing

Installation and/or service work is only to be performed
by qualified and trained Service personnel from Robert
Bosch GmbH or organizations commissioned by Robert
Bosch GmbH. No warranty claims will be accepted if
devices have been opened or modified by non-author-
ized persons.
Electrical systems and equipment are only to be started
up if they are in proper working order (refer also to
EDIS information 200108_084). This requirement is
deemed to have been fulfilled if compliance with the
rules of electrical engineering practice is ensured on
completion of modification or service work (original
inspection). This involves the performance of testing
of the type and extent specified in the rules of electri-
cal engineering practice (in Germany e.g. BGV A3). In
Germany, the nature and extent of testing are specified
in VDE 0701/0702 Part 1. The corresponding legislation
of the country concerned must be observed.
i
Heed the handling instructions relating to ESD when
working on an open device. These instructions can
be found in EDIS under "Bosch Test Equipment >>
Test systems A-Z >> General information >>
Safety".
2.4

Test equipment

Description
ST-PC (PC unit/Laptop service technician)
P 140
Ring coil (n=20) and (n=500)
Digital multimeter and measuring cables
Temperature sensor
Stroboscope
USB connecting lead
| 11 de
Order number
1 687 230 036
1 687 022 767
1 684 465 491
|
1 689 975 199 2009-09-25