Intended Use; Restraints; Basic Safety Information - bürkert 8201 Bedienungsanleitung

2.

inTenDeD use

use of the electrolyte monitoring that does not comply with
the instructions could present risks to people, nearby installa-
tions and the environment.
• The electrolyte monitoring is intended solely for the control of
the level of electrolyte in the electrolyte bottle of pH sensor type
8201.
• Protect this device against electromagnetic interference,
ultraviolet rays and, when installed outdoors, the effects of the
climatic conditions.
• Use this device in compliance with the characteristics and
commissioning and use conditions specified in the contractual
documents and in the user manual.
• Requirements for safe and proper operation are proper trans-
port, storage and installation as well as careful operation and
maintenance.
• Only use the device as intended.
2.1.

Restraints

Observe any existing restraints when the device is exported.
6
Type 8201
Intendeduse
3 . b As i c sA f e T y
i n f oR m ATi o n
This safety information does not take into account:
• any contingencies or occurences that may arise during assembly,
use and maintenance of the devices.
• the local safety regulations that the operator must ensure the staff
in charge of installation and maintenance observe.
Danger due to electrical voltage.
Danger due to the nature of the fluid.
Various dangerous situations
To avoid injury take care to:
• prevent any power supply switch-on.
• carry out installation and maintenance by qualified and skilled
staff with the appropriate tools.
• guarantee a set or controlled restarting of the process, after a
power supply interruption.
• use the device only if in perfect working order and in compli-
ance with the instructions provided in the user manual.
• observe the general technical rules during the planning and use
of the device.
English