Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INTRODUCTION
OUTDOOR ZENIT P100 DTW
CLZP100DTW
OUTDOOR ZENIT P200 DTW
CLZP200DTW
CONTROL FUNCTIONS:
1-channel, 2-channel 1, 2-channel 2, 2-channel 3, and 4-channel DMX control
Master/slave mode
Standalone function
PROPERTIES:
Outdoor spotlight with IP65 protection. Warm white and amber-colored LEDs with dim-to-warm function. 2 concentrators included. 5 DMX
modes. DMX-512 control. Master/slave mode. Standalone functions. Stand and/or mounting bracket and 0.6" TV spigot included. Operating
voltage: 100–240 V AC / 50–60 Hz.
CLZP100DTW
125 W COB-LED (warm white, amber). Power consumption 140 W. Lens 1: 42°, lens 2: 26°
CLZP200DTW
240 W COB-LED (warm white, amber). Power consumption 290 W. Lens 1: 34°, lens 2: 16°
The spotlights comply with the RDM standard (Remote Device Management). Remote device management allows the user to view the status
and configuration of RDM terminals via an RDM-capable controller.
CONNECTIONS, CONTROLS, AND DISPLAY ELEMENTS
8
5
7
6
3
1
1
POWER IN
IP65 Power Twist power input connector with rubber sealing cap. Operating voltage: 100–240 V AC / 50–60 Hz. Connect using the provided
power cable (when not in use, always close with rubber sealing cap).
2
POWER OUT
IP65 Power Twist power output connector with rubber sealing cap. Provides power to additional CAMEO spotlights. Ensure that the total
power consumption of all devices connected to the device does not exceed the given Ampere (A) value (when not in use, always close with
rubber sealing cap).
3
DMX IN
Male IP65 5-pin XLR connector to connect a DMX controller (e.g. DMX console; when not in use, always close with rubber sealing cap).
4
DMX OUT
Female IP65 5-pin XLR connector to transmit a DMX control signal (when not in use, always close with rubber sealing cap).
4
2
5
6
3
1
2
8
4
7
5
Werbung
Inhaltsverzeichnis
