Remove Food; Cleaning; Instant Cleaning Of The Blender Jug - Silvercrest SSMP 2000 A1 Bedienungsanleitung

BB&3(B%ERRN 6HLWH  0LWWZRFK  $SULO    
• Turn the control dial|11 first to posi-
tion|0 (Off) and then back to position M
to reactivate the button functions.
3. To chop harder food, press button
P|14. Work with pulses (press button
P|14 repeatedly). The number and
length of the pulses will depend on the
quantity and consistency of the food. All
3 buttons |12,
flash blue.
Crushed Ice
1. Fill ice cubes into the blender jug|5.
2. Turn the control dial|11 to position M.
All 3 buttons |12,
flash blue.
3. Press the button
vice operates with interval function.
Button |13 lights up in blue. The de-
vice will switch off automatically.
Smoothies
This function is used to prepare smoothies.
1. Turn the control dial|11 to position M.
All 3 buttons |12,
flash blue.
2. Press the button
creases and decreases several times
during the mixing process. Button
|12 lights up in blue. The device will
switch off automatically.

7.3 Remove food

NOTE: do not store foodstuffs in the blender
jug|5 or in contact with other product parts
for longer than 24 hours. This also applies
to storage in the refrigerator.
1. Turn the control dial|11 to position 0
(Off).
2. Once the motor has come to a com-
plete standstill, remove the blender
jug|5 from the motor block|9. Lift the
blender jug|5 vertically upwards.
3. Figure C: remove the safety bracket|4
4. Empty the blender jug|5.
5. Clean the device as soon as possible

8. Cleaning

|13 and P|14
Clean the device prior to its first use!
8.1 Instant cleaning of the
1. Position the blender jug|5 on the motor
|13 and P|14
|13. Now, the de-
2. If necessary, turn the control dial|11 to
3. Fill some warm water and detergent into
4. Close the blender jug|5 with the lid|3
5. Connect the mains plug|10 with the
|13 and P|14
6. Turn the control dial|11 to position M.
|12. The speed in-
7. Press the button P|14 repeatedly.
8. Turn the control dial|11 to position 0
9. Disconnect the mains plug|10 from the
10. Once the motor has come to a com-
11. Figure C: remove the safety bracket|4
12. Empty the blender jug|5 and rinse it
from the locking device and press the
lid|3 upwards.
after use.
blender jug
block|9 so that the handle|6 points to
the right.
position 0 (Off).
the blender jug|5.
such that the safety bracket|4 engages
audibly at the handle|6.
wall socket.
(Off).
wall socket.
plete standstill, remove the blender
jug|5 from the motor block|9. Lift the
blender jug|5 vertically upwards.
from the locking device and press the
lid|3 upwards.
with clean water.
51
GB