Nordcap CD290-1004 Betriebsanleitung Seite 12

O P E R A T I O N P R O B L E M S A N D T H E I R S O L U T I O N S
What if ...
The appliance is plugged in to the mains but it does not work and the electricity
supply voltage indicator is not illuminated.
installations are in order. Check that the plug is correctly inserted into the electricity supply
socket.
The noise has become louder. Check that the appliance is standing stable, on a level place.
To make it level, regulate the front feet. Check if the appliance is not touching any furniture,
and that no part of the refrigeration system at the back part of the appliance body is touching
the wall. Pull the appliance away from any furniture or walls. Check that the cause of increased
noise isn't due to bottles, cans or dishes in the appliance that might be touching each other.
Water has appeared at the bottom of the refrigerator compartment. Check whether a
thaw water channel space isn't blocked. Clean the thaw water channel space with a cleaner
intended for that purpose.
Water has appeared under the appliance. The thaw water collection tray has slipped off
the compressor. Place the tray on top of the compressor.
When the appliance door is opened, the rubber sealing gasket pulls out. The gasket is
smeared with sticky foodstuffs (fat, syrup). Clean the sealing gasket and the groove for it with
warm water containing soap or dishwashing detergent and wipe dry. Put the rubber sealing
gasket back into the place.
High temperature in appliance, the compressor operation pauses are short. Ascertain
whether the appliance door/doors are shutting tightly, whether the door wasn't kept open longer
than necessary when taking out or putting in foodstuffs or whether a large amount of warm
food was placed in the appliance.
The top of the appliance has condensation on it. The ambient relative air humidity is
above 60 %. Ventilate the room where the appliance stands and if possible remove the cause
of the humidity.
IF YOUR APPLIANCE IS NOT WORKING PROPERLY, ASCERTAIN WHETHER YOU CAN REMEDY THE
CAUSE OF THE FAULTY FUNCTIONING OF THE
APPLIANCE YOURSELF.
problem yourself, contact the nearest refrigerator
service representative by telephone or in writing.
When making contact necessarily indicate the
refrigerator model 1 and number 2. You will find
this data on the product label, which is glued to the
wall.
( T R O U BL E S H O O T I N G )
W A R RA N T Y S E RV I C E
If you cannot solve the
Check that your house electricity supply
11