4.3
Secondary Suspension
Hanger
Where a hanger is provided, the bearing parts of the hanger shall be capable of
supporting ten (10) times the weight of the luminaire without permanent deformation
and shall be manufactured from non-combustible materials such as steel or its
equivalent.
Accessories
The design of the luminaire shall be such that removable accessories, e.g. colour frames
and barn doors, when properly inserted, cannot fall out of the luminaire.
Secondary Suspension
A secondary suspension shall be provided for the luminaire, except where the luminaire
is arranged for floor mounting or if it is intended for handheld use. The secondary
suspension shall be designed and mounted in such a way that in the event of a failure of
the primary suspension, no part of the luminaire can fall. The secondary suspension
must withstand a 30 cm vertical drop for 30 times.
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
2
6.
Operation
6.1
Control Panel
Access the control panel functions using the four panel buttons located around the
display.
Menu
Enter
V. 01 – 22/03/2018
DMX input/output
microphone
scroll through the menu options
upwards through the menu list
downwards through the menu list
confirm a selection
HQLE10044
3
4
6
power input
display + menu buttons
©Velleman nv