Selecting Programme Positions; General Controls - Changing Programme Position; Sound Controls - Volume, Sound Mute, Bass Boost, Super Woofer, Bass/Treble/Balance; Stereo And Bilingual Transmissions - Stereo Or Dual Language Broadcasts - Toshiba 42WH46 Serie Bedienungsanleitung

General and sound controls,
stereo/bilingual transmissions

Selecting programme positions

To select a programme position use the numbered
buttons on the remote control.
For programme positions below 10 use 0 and the
required number e.g. 01 for programme position 1.
Programme positions can also be selected using P
and P
(Q).
e
To revert to the previous programme position press
To display on-screen information i.e. programme position,
input mode or stereo/mono signal, press CALL.
Sound controls
Volume
+
j — ( S ) or j
Press
Sound Mute
k
Press once to turn the sound off and again to cancel.
Bass Boost – to enhance the depth of sound
n
Press then S or R to adjust the effect. The difference
will only be noticeable on sound with a strong bass. Press
n again to turn Bass Boost off.
Super Woofer
When an active Super Woofer is connected (to the
Woofer Out connection on the back of the television)
will control it only if Woofer Ext. is chosen.
pressing n
Select AV connection in the SET UP menu, press Q
until Woofer is highlighted then press S or R to choose
Ext.
( P )
f
.
^ ^
( R ) to adjust the volume.
Bass, Treble and Balance
SOUND
Bass
Treble
Balance
Speaker
EXIT
Press MENU and S or R to select SOUND.
1
Press Q to highlight Bass, Treble or Balance
2
and S or R to change the setting.
When connecting to a Hi-fi unit, set the Speaker
option to Off. Then select Fixed or Variable for
the Audio output in the AV connection menu.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Stereo... Press
O
Bilingual... Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press
O
12
+ 8
0
0
On
: To exit
Mono will appear.
to select Stereo or Mono.
I/II
to select Dual 1, Dual 2 or Mono.
I/II