Parts Description; Before Using For The First Time; Stand Assembly - Kiwi KG 5803 Bedienungsanleitung

PARTS DESCRIPTION

1. Body 2. Plastic foot 3.Zinc plate 4. rubber caps 5.M4 nut 6. straight metal pipe 7.heating
element 8. M4x16 Screw 9.grill rack

BEFORE USING FOR THE FIRST TIME

Clean the barbecue and its accessories. When it is first switched on, the grill may emit a new
smell. A small amount of smoke may also be noticeable. We therefore recommend you to
heat up the arbecue for about 5 minutes without any food stuffs.

STAND ASSEMBLY

1. Remove any packaging materials from the appliance.
2. Clean the grill rack and its accessories.
3. Fasten the 3 pcs of plastic foot on the back side of body. see pic. No.2 above.
4. Insert the straight metal pipe through the 2 holes that the zinc plate and body have on
two sides.
5. Fill the zinc plate with water up to the 0.4L.
6. Place the two rubber caps onto the left &right sides of the straight metal pipe to avoid the
overheat.see pic.No.4 above
7. Fix the body and zinc plate with M4 nut.see pic.No.5 above
8. Fix the heating element to the body with M4x16 Screw .see picture no.A above.
9. Fix the grill rack on top.
10. Let the grill heat up for a moment without any food on the rack. This will reduce the smell
when switching on the new grill for the first time (a slight smell and a little smoke may be
emitted, ensure sufficient ventilation)
3
KG 5803 User Manual