Assembly Material Required - Kompernass KH 3256 Bedienungsanleitung

WORKSHOP TOOL
TROLLEY KH 3256
Intended use
The rolling Workshop Tool Trolley is intended for
the storage and tidy arrangement of hand tools.
It is intended for domestic use only, not for
commercial purposes.
Items supplied
After unpacking, immediately check to determine
that all listed items are present and that there are no
visible damages
1 Lower cupboard
1 Top piece with 4 drawers
1 Shelf
2 Carrying handles
1 Storage tray
4 Transport roller-wheels
6 Attachment hooks
2 Hexagonal screws M10
2 Washers M10
8 Cross-head screws
1 Operating instruction pamphlet
Safety notices
• Do not excessively burden the shelf and the
drawers.
• Store heavy objects in the lower part of the
Workshop Tool Trolley.
• Secure the wheels of the Workshop Tool Trol-
ley against inadvertent rolling, e.g. by wedges.

Assembly material required

1 Rubber mallet
1 Cross-head screwdriver
1 Open-ended spanner M10
Assembling the roller-wheels
Carefully secure the four roller-wheels to the
lower cupboard with the help of a rubber
mallet (see Fig. 1).
Assembling the side storage
tray
Assemble the side storage tray to the lower cup-
board with the hexagonal screws M10 and the
washers M10 (see Fig. 1). For this use the
openended spanner M10.
Fig. 1
- 3 -