Installing The Stove - Dometic ORIGO E100 Bedienungsanleitung

Dometic ORIGO
 Avoid cabinet storage space above the stove.
Otherwise you risk burns and fire when reaching over the stove.
 Do not operate the device in spaces where danger of explosion is present.
6.2

Installing the stove

NOTICE! Danger of damaging the device!
A
Before drilling any holes, make sure that no electrical cables or oth-
er parts of the vehicle can be damaged by drilling, sawing and filing.
➤ Cut a rectangular hole into the countertop (dimensions see following
table):
Model
E100
E200
E300
➤ Place the stove in the middle of the cutout.
➤ Secure the stove using a non-hardening compound which should be laid
between the glass-ceramic and the countertop.
This permits later removal of the appliance without damage if service
necessary.
➤ Place a class B-1 fire extinguisher in reaching distance.
6.3 Connecting the stove electrically
WARNING! Danger of injury!
!
The stove may only be connected by a qualified specialist.
The following information is intended for technicians who are
familiar with the guidelines and safety precautions to be applied.
EN
Dimensions (L x W x D)
282 x 302 x 80 mm
516 x 282 x 80 mm
508 x 467 x 80 mm
Mounting the stove
1 7 5
11 / x 11 / x 3 /
8 8
5 1 5
20 / x 11 / x 3
16 8
3 5
20 x 18 / x 3 /
8 32
in
32
/ in
32
in
11