Preparing Rice That Has Not Been Pretreated - Silvercrest SRK 400 A2 Bedienungsanleitung

Preparing rice that has not been pretreated

NOTE
► Coat the inside of the cooking bowl w evenly with a little fat or vegetable
oil to achieve a better cooking result .
1) Open the lid by pressing the release 2 and lifting the lid simultaneously .
2) Remove the cooking bowl w .
NOTE
► If the cooking bowl w is damaged, do not continue to use it! The damage
may have caused the safety shut-off of the appliance to activate, and the
appliance will not allow itself to be switched on .
3) Measure the desired quantity of rice with the help of the supplied measuring
cup e .
As a general rule: A level measuring cup e – filled with rice – is a portion
for one person . Determine the right quantity of rice / water for yourself by
making a few cooking attempts .
4) Thoroughly wash and drain the rice . This may remove some of the nutrition,
but not washing the rice could lead to poor cooking results and increased
foam and steam formation in the cooking bowl w . Always pay attention to
the rice manufacturer's preparation instructions
5) After washing the rice, pour it rice into the cooking bowl w and smooth it out .
6) Then add water up to the relevant CUP markings in the cooking bowl w .
–
2 Measuring cups of rice = Water up to CUP marking "2"
–
3 Measuring cups of rice = Water up to CUP marking "3"
–
4 Measuring cups of rice = Water up to CUP marking "4"
–
5 Measuring cups of rice = Water up to CUP marking "5"
Subject to taste preferences, salt can also be added to the rice .
SRK 400 A2 GB │ MT │ 63 ■