Krampouz GGCIC40AA Bedienungsanleitung Seite 14

Commercial description of appliance: GGCIC4 (model with 2 burners).
6 kW PLANCHA – TECHNICAL SPECIFICATIONS, CAT II E+3+ APPLIANCE
TYPE
Pressure
in mbar
of GAS
Natural
G20
gas
Butane G30 28/30
Propane G31
Connection to gas
The supply configuration of the appliance is marked on the data plate stuck to the rear of the
appliance.
If you have to change the gas configuration of your appliance, refer to the Adjustment
chapter page 15.
- The plancha must be connected from the fitting at the rear of the appliance with a metal
hose in compliance with NF D 36121 for natural gas and NF D 36125 for 3
Butane/propane gas.
- Check the air tightness of the fitting with soapy water.
- Never test the air tightness with a flame.
BUTANE/PROPANE
Connection for use of your appliance in category I3
For G30 Butane gas use an NF 28 mbar safety regulator
- NFD36-125 metal hose/length: 1 m
- XPD36-112 hose/length: 1 m
G31PROPANE
Use a NF 37 mbar safety regulator
- Nipple type end pieces are prohibited
- NFD36-125 metal hose/length: 1 m
- XPD36-112 hose/length: 1 m
NATURAL GAS
Connection for use of your appliance in category 12E+
For G20 natural gas
- Butane nipple type end pieces are prohibited
- NFD36-121 metal hose
Adjustment value
Injector
marker
see FIG.2 page 19
20 1.35
0.90
37 0.90
Rated output
of venturi
in W
1 mm 6000
3rd family gas
5 mm 6000
5 mm 6000
- 14 -
Reduced
Rated consumption output in
630 l/h 3200 W
456 g/h 3200 W
456 g/h 3200 W
rd
family
Watt