Hooking Up The Ri Dock - Onkyo DS-A1X Bedienungsanleitung

Getting Started
—Continued

Hooking Up the RI Dock

Depending on the Onkyo amp that you're
using, choose connection method A or B.
A: Connect the RI Dock's AUDIO OUT L/R jacks
and VIDEO OUT jack to an RI Dock-compati-
ble input on your Onkyo amp. (You might
need to change the input display to "HDD"
or "DOCK.")
B: Connect the RI Dock's AUDIO OUT L/R jacks
to the TAPE (MD, CDR) IN jacks on your
Onkyo amp. And connect the RI Dock's
VIDEO OUT jack directly to your TV.
See your amp's instruction manual for details.
Supplied
cable
White
Red
Yellow
-capable amp
1. Using the supplied AV cable, connect the RI
Dock's AUDIO OUT L/R jacks to a suitable
audio input on your amp. And connect the
RI Dock's VIDEO OUT jack to a video input
on your Onkyo AV receiver (A) or TV (B).
The input you use depends on the type of
Onkyo amp you have. See your amp's
instruction manual for details.
2. Using the supplied
RI Dock's jack to an
the Onkyo components in your system.
3. Connect the supplied AC adapter to the RI
Dock's DC IN jack.
6
En-
AC adapter
5
Wall outlet
Supplied AV cable
AUDIO
INPUT
L
R
VIDEO
INPUT
VIDEO
INPUT
Yellow
TV
or
cable, connect the
jack on one of
Note: When the AC adapter is unplugged or
not connected to the RI Dock, the RI Dock
will output no sound or video,
will not work, and your iPod's battery will not
be charged.
Caution: Connect the supplied
only jacks. Do not connect headphones
to the jack, as it will damage your equip-
ment.
■ If you've connected the RI Dock's AUDIO
OUT L/R jacks to your amp's TAPE (MD,
CDR) IN jacks and also want to connect
the RI Dock's VIDEO OUT jack to your amp
Connect the RI Dock's VIDEO OUT jack to an
unused video input on your amp.
When you want to watch an iPod slideshow or
video, select the video input source first, and
then select the TAPE (MD, CDR) input source.
Your AV receiver will output the audio being
fed to the TAPE (MD, CDR) input, and because
the video source doesn't change when the
TAPE input source is selected, it'll continue to
output the video being fed to the video input.
■ What to do if you already have a compo-
nent connected to your amp's TAPE input
or RI Dock-compatible input
Connect the RI Dock to an unused AV input on
your amp. However, you will not be able to use
any of the functions.
functions
cable to