Assembly And Setting Up; Before First Use; Operation; Raclette - Silvercrest SMRP 450 B1 Bedienungsanleitung

Assembly and setting up

WARNING! RISK OF FIRE!
► Never place the appliance underneath wall
cupboards or next to curtains, cupboard
walls or other flammable objects.
► Always place the appliance on a heat-resistant
surface.
1) Remove all of the parts from the box and
remove the packaging material and any
protective film.
GB
MT
2) Clean all of the components as described in
the Chapter "Cleaning and care" to remove
any packaging residue. Ensure that all parts
are completely dry.
3) Place the appliance on a clean and level heat-
resistant surface. Ensure that you do not place
the appliance directly next to a wall or a cup-
board.
Each person should have unimpaired access to
one of the pans
4) Place the griddle
the griddle
5) Slide the pans
6) Insert the plug into a mains power socket.
Before first use
1) Slide the pans
2) Grease the griddle
which is suitable for baking/grilling. This makes
it easier to remove any cooking residue on the
griddle .
3) Move the ON/OFF switch
appliance to heat up for 5 minutes.
4) After 5 minutes, move the ON/OFF switch
back to "O".
5) Then disconnect the plug and allow the
appliance to cool down.
30
.
on the base unit so that
is firmly in place.
into the appliance.
into the appliance.
lightly with fat or oil
to "I" and let the
NOTE
► The first time the appliance heats up, a small
amount of smoke and odour may be gener-
ated due to production-related residue. This
is completely normal and is completely harm-
less. Provide sufficient ventilation by opening
a window, for example.
6) Clean the griddle
"Cleaning and Care".
7) Clean the pans
"Cleaning and Care".
8) Ensure that all parts are completely dry before
operating the appliance.
The appliance is now ready for use.

Operation

Raclette

1) Lightly oil the inside of the pans
the griddle .
2) Insert the plug into a mains power socket.
3) Move the ON/OFF switch
integrated control lamp on the ON/OFF switch
lights up. Let the appliance heat up for
about 10 minutes. The pans
inserted into the appliance to heat them up.
4) Fill the pans with the desired ingredients.
Ensure that the pans
otherwise the food could get too close to the
heating element
5) Place the pans into the appliance. The slight
recess in the appliance helps to keep the pans
in place.
6) Remove the pans
soon as the contents are cooked.
WARNING! RISK OF INJURY!
► Apart from the insulated handles, the pans
are extremely hot! The pans
only be held by the handle!
as described in Chapter
as described in Chapter
and top of
to "I". The
not need to be
are not overfilled,
or even touch it!
from the appliance as
must therefore
SMRP 450 B1