Sony PXW-X200 Bedienungsanleitung Seite 12

Attaching the essence marks to the recorded data of this unit
When you use the Content Browser Mobile application, you can attach the essence marks while recording
to this unit. They are also applied to the proxy data. You can set the clip position of a file simply using
this essence mark information.
Notes
• This is only enabled for the same size proxy data which succeeds the original file information recorded to this unit.
• When the original file is divided, the essence marks are not applied to the proxy data.
About setting the streaming format and proxy format
When "Bit Rate" of the proxy format setting is set to "9Mbps" in V1.2 (camcorder software), "Bit Rate"
of the streaming setting cannot be set to more than "6Mbps." However, the setting can be done in V2.0
(camcorder software). If you select the preset whose "Bit Rate" is set to more than "6Mbps," "Bit Rate"
of the streaming is not changed to "3Mbps" automatically.
About the monitoring of Content Browser Mobile
The monitoring video image may stop due to signal conditions when used or mobile devices.
About the corresponding functions via the network
connection
When "Network Mode" in the "NETWORK SET" menu is set to "Wired LAN," the access to the Web
menu of the unit and the Wi-Fi remote controller can be performed.
When "Wi-Fi Remote," which is changed to "Network Remote" in the "NETWORK SET" menu, is set
to On, access is permitted.
Note
To prevent unauthorized access from the internet, we recommend to set "Network Remote" to On when the wired LAN
network is not connected to the internet. When connecting to the internet, confirm whether the connecting destination is
a secure network.
About the channel of the wireless LAN
You can use the new CBK-WA02 wireless LAN module (sold separately) that is compatible with the
5GHz range.
When the wireless LAN module compatible with 5GHz is installed and the operation mode of the wireless
LAN is set to "Station" in the "Network Mode" of the "NETWORK SET" menu, you can connect to the
access point compatible with 5GHz.
Some channel settings for the wireless LAN have been changed.
Set "Channel" in the "NETWORK SET" menu.
• Auto: CH1 to CH11 automatically selected
• CH1 to CH11: Selecting a channel manually
• Auto (5GHz): The channel in the 5GHz band is selected automatically (displayed only when the wireless
LAN module compatible with 5GHz is attached)
12