Delivery Contents; Ce Marks, Conformity Description; Installation; Quick Installation Guide - Endress+Hauser iTEMP PA TMT184 Bedienungsanleitung

3 Installation

Delivery contents

!
CE-marks, conformity
description

Quick installation guide

48
2.2 Delivery contents
The delivery contents of a temperature head transmitter are as follows:
• Head transmitter
• Installation screws, installation springs and circlips
• Operating instructions per packing unit
• ATEX operating instructions for use in hazardous areas
Note!
Please take note of the head transmitter accessories in the chapter »Accessories« on page 74
2.3

CE marks, conformity description

The unit has been manufactured using up-to-date production equipment and has left our works in
perfect and safe condition. It complies with the safety requirements to IEC 61010 norms and regu-
lations 'Safety requirements for electrical measurement, control and laboratory instrumentation'.
The unit described in these instructions therefore fulfils the legal requirements set by the EU guide
lines. The manufacturer confirms a positive completion of all tests by fitting the unit with a CE mark.
3 Installation
3.1 Quick installation guide
ƒig. 4: Installation of head transmitter into a Form B sensor connection head (left side) and a field housing (right side)
TMT184
Endress+Hauser