EVGA 1200 P2 Anleitung Seite 3

1000W / 1200W PLATINUM Power Supply User Manual
Introduction: Premium Power
Thank you for purchasing the EVGA 1000P2/1200P2 80PLUS® PLATINUM Rated power supply. The SuperNOVA
PLATINUM series are premium quality power supplies intended to meet the needs of the most demanding PC
enthusiast systems. Designed with enthusiast needs in mind the SuperNOVA PLATINUM series is the best choice
to power next generation systems.
SuperNOVA 1000W PLATINUM
Safety Information
WARNING: This unit has no user-serviceable parts inside. Opening the casing presents a risk of electrocution and will
void the products warranty. EVGA will not be responsible for any result of improper use, including but not limited to,
any use of the product outside of its intended purpose or use inconsistent with the warranty terms available online.
(Warranty information is available at www.evga.com/support/warranty
www.evga.com/manuals).
What's in the Box
Included with your EVGA 1000P2/1200P2 power supply offers the following items for proper installation and
optional testing:
1000P2 Series
(1) EVGA Power Supply (2) 6+2 pin + 6 pin PCI-E
(1) EVGA Manual VGA Cables
(4) Mounting Screws (2) 3 SATA cables
(1) EVGA PSU Tester (24-pin) (2) 2 SATA cables
(1) EVGA Cable Bag (1) 3 Molex cable
(1) 24-pin ATX Cable (1) 2 Molex cable +
(2) 4+4 pin EPS12V 1 Floppy connector
CPU Cables (1) Power Cord cable
(4) 6+2 pin PCI-E VGA (optional)
Cables
English
SuperNOVA 1200W PLATINUM
and this manual is available at
1200P2 Series
(1) EVGA Power Supply (2) 6+2pin +6pin PCI-E
(1) EVGA Manual VGA Cables
(4) Mounting Screws (4) 3 SATA cables
(1) EVGA PSU Tester (24-pin) (1) 3 Molex cable
(1) EVGA Cable Bag (1) 2 Molex cable +
(1) 24-pin ATX Cable 1 Floppy connector
(2) 4+4pin EPS12V CPU Cable (1) Power Cord cable
(4) 6+2pin PCI-E VGA Cables (optional)
2
1000W / 1200W PLATINUM Power Supply User Manual
Features
STABLE POWER
The SuperNOVA PLATINUM series has outstanding electrical performance with ultra stable voltage and
extremely clean power output. This can help you achieve the highest possible overclock (optional) and provide
the most stable and reliable power to all components. The SuperNOVA PLATINUM series also has high efficiency
up to 90% and is 80 PLUS PLATINUM certified.
DUAL THERMAL CONTROL SYSTEM
The EVGA ECO Intelligent Thermal Control System provides silent operation at low loads, improved efficiency and
longer life span of the fan. Enabled by a simple switch directly on the power supply, the "No Fan Spin" feature is
ideal for users looking to reduce ambient noise overall. Save on energy costs and unnecessary fan usage with the
EVGA ECO Thermal Control System.
TOP QUALITY PROTECTIONS
The SuperNOVA PLATINUM series comes equipped with the most comprehensive protection set possible, including
Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit
Protection (SCP), Over Current Protection (OCP). This product is also covered by an exceptional 10-year warranty
and EVGA's legendary customer service and support.
SUPERIOR BUILD QUALITY
The SuperNOVA PLATINUM series is built to the highest standards, using 100% Japanese capacitors rated at
105 degrees Celsius and high quality brand-name semiconductor components for the highest performance and
reliability. The Ultra Quiet 140mm double ball bearing fan provides adequate cooling to allow near silent operation
when not needed and proper cooling during heavy load operation.
MODULAR DESIGN
Reduce clutter in the case, improve ambient temperatures with better airflow overall and provide a clean look to
any system. Fully Modular PSU designs allow the user to disconnect the cable from the power supply side if they
are not needed for the specific configuration. This can help free up space inside the case and improve cable
management as well as airflow throughout the system. EVGA offers fully modular designs on all P2 series and
include a cable storage bag in case you plan to upgrade or add more components for storage.
Installation
1. Remove the power supply from its packaging.
2. (Optional) Using the provided PSU testing tool, connect the 24pin cable to the
PSU, then attach the testing tool to the 24pin cable. Connect the ATX power cable
to the PSU and plug the PWR cable into the outlet or surge protector/UPS you plan
to use. Once connected, turn the power switch to the ON position. (If the ECO mode
is set to ON, the fan will not spin)
Please note: If you are using a water cooling configuration, this testing tool
provides a simple, safe, option for bleeding/draining/testing water cooling
components without the need of a paperclip or other device.
3
English