Technical Data; Right Way To Lift The Machine; Size Of The Logs To Be Split; Recommended Oils - Bell SPV6 E Wartungs- Und Betriebsanleitung

ENGLISH

2 - TECHNICAL DATA

Lenght (mm)
Widht (mm)
Height (mm)
Weight (kg)
Max. force (tons.)
Log capacity (mm)
Diameter of the log to be split (cm)
Hydraulic oil tank capacity (lt.)
Hydraulic oil total capacity (lt.)
Supply
Absorption
Power
Noise ≤ 81 dB(A) measured at the height of the operator's ear in the working position with the log splitter in operation
•
The ears must be suitably protected (ear defenders).

2.1 - Right way to lift the machine

The machine must be lifted by means of a fork lift truck, placing the forks as shown in fig.14a, page 4, or by a sling equipped with a special lift-band with
capacity bigger than 300 Kg., as shown in fig.14b, page 4.

2.2 - Size of the logs to be split

Figure 2 on page 2 shows the maximum log sizes that can be split.
The diameter of the log is indicative: a small log can be difficult to split if it has knots or is of a particularly twisted fibre.

2.3 - Recommended oils

We recommend use of the following oils for the hydraulic cylinder:
SHELL TELLUS T22
ARAL VITAM GF22
BP ENERGOL HCP22
TEXACO RANDO HDZ 22/32
MOBIL DTE11 or equivalent
DO NOT USE OTHER GRADE OILS.
D22200860
SPV6 E SPV6 T
Fixed work surface Fixed work surface
~ 720
~ 520
~ 1020÷1550 ~ 1020÷1550
~ 91
~ 6
~ 570
~ 10÷30 ~ 10÷30
~ 3
~ 4,6
230V 50Hz 1-phase 400V 50Hz 3-phase
~ 14 A
3 Hp - 2,2 KW 3 Hp - 2,2 KW
SPV6 E
Movable work surface Movable work surface
~ 720 ~ 720
~ 520 ~ 520
~ 1020÷1550
~ 91 ~ 94
~ 6 ~ 6
~ 570 ~ 570 / 1070
~ 10÷30
~ 3 ~ 3
~ 4,6 ~ 4,6
230V 50Hz 1-phase
~ 5 A ~ 14 A
3 Hp - 2,2 KW
SPV6 T
~ 720
~ 520
~ 1020÷1550
~ 94
~ 6
~ 570 / 1070
~ 10÷30
~ 3
~ 4,6
400V 50Hz 3-phase
~ 5 A
3 Hp - 2,2 KW
17