Velleman PIR45 Bedienungsanleitung Seite 3

 Familiarise yourself with the functions of the device before actually
using it.
 All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
 Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
4. Features
 automatic day/night identification
 adjustable light sensitivity and on-time
 for building in
5. Installation
5.1 Installation Guidelines
 Avoid pointing the detector towards objects with highly reflective
surfaces such as mirrors.
 Avoid pointing the detector near heat sources such as heating
vents, air conditioning units, etc.
 Avoid pointing the detector towards objects that may move in the
wind such as curtains, plants, etc.
 Install the detector at a distance of minimum 60 cm when using a
lamp of 60 W or more.
5.2 Installation
This detector can be installed flat on a wall or in a corner. Use an
appropriate screwdriver and the included screws and nylon plugs.
1. Loosen the screw of the clear plastic cover. Connect the detector
(see below) and re-install the cover.
2. Fold the metal springs upwards and slide the detector into the
pre-cut installation hole.
V. 01 – 17/05/2017
PIR45
3 ©Velleman nv