Connecting Peripheral Equipment; Connection With A Pc; Connection With Av Equipment - Sharp PN-325 Bedienungsanleitung

Connecting Peripheral Equipment

Caution
• Be sure to turn off the main power switch and disconnect
the plug from the power outlet before connecting/
disconnecting cables. Also, read the manual of the
equipment to be connected.
• Be careful not to mix up the input terminal with the output
terminal when connecting cables. Mixing up the input and
output terminals may cause malfunctions and the other
problems.

Connection with a PC

PC digital RGB input
terminal
DVD-D
IN
PC analog RGB input terminals (BNC)
PC audio input terminal
• Use a commercially available signal cable (DVI-D 24 pin)
for the PC digital RGB input terminal.
• Use a commercially available signal cable (Mini D-sub
15 pin) for the PC analog RGB input terminal.
• Use a commercially available signal cable (BNC) for the PC
analog RGB input terminals (BNC).
• Use a commercially available audio cable (mini stereo jack)
for the PC audio input terminal. Use an audio cable without
resistance.
TIPS
• Images may not be displayed properly depending on the
computer (graphics board) to be connected.
• Use the automatic screen adjustment when a PC screen is
displayed for the first time using ANALOG1 or ANALOG2,
or when the setting of the PC is changed. (See Operation
guide.)
10
E
PC analog RGB input
terminal
RGB (ANALOG1)
IN
RGB (ANALOG2) IN
R G B H V
PC
AUDIO
IN

Connection with AV equipment

Component video input
terminals
COMPONENT IN
Y Cb/Pb Cr/Pr
Audio input terminals
(COMPONENT)
L
R
AUDIO
IN
COMPONENT
• Use a commercially available component cable (BNC) for
the component video input terminals.
• Use a commercially available S-video cable for the S-video
input terminal.
• Use a commercially available video cable (BNC or RCA) for
the composite video input terminal.
• Use a commercially available audio cable (RCA) for the
audio input terminals.
• The component video input terminals are compatible with
the video signals below:
1080i @50/60Hz, 720p @50/60Hz, 576p @50Hz,
576i @50Hz, 480p @60Hz, 480i @60Hz
TIPS
• The S-video input terminal, composite video input terminal
(BNC), and composite video input terminal (RCA) cannot
be used simultaneously. Connect the cable to one
terminal only. (Do not connect any cables to the remaining
terminals.)
S-video input terminal
S-VIDEO
IN
Composite video input
terminals
or
VIDEO VIDEO
IN IN
Audio input terminals
(VIDEO)
L
R
AUDIO
IN
VIDEO