Use And Maintenance - Gorenje GV 100 Gebrauchsanweisung

USE AND MAINTENANCE

After connecting to water supply and other heating sources, your hot water tank is ready
for use. Before first use, the tank should be filled with water. When filling the tank for the
first time, turn on the hot water lever (on the mixer tap). The tank is full, when water starts
dripping from the mixer tap outlet pipe.
Solar energy or central heating system is usually the source for heating the sanitary
water, and heating regulation is provided within the heating system.
The exterior of the hot water tank may be cleaned with lukewarm water and a mild detergent
solution. Do not use solvents and abrasive cleaners.
Regular preventive maintenance inspections ensure faultless performance and long life of
your hot water tank. The first of these inspections should be carried out by the authorised
maintenance service provider some two years from the date of installation in order to check
the wear of the protective anticorrosion anode and to remove any build-up of calcium and
lime as required. The build-up of calcium and lime depend on the quality, quantity and
temperature of water. The maintenance service provider shall also issue a status report and
recommend the approximate date of the next inspection.
Wear of the protective anticorrosion anode is inspected visually. Replace the anode if the
diameter of the anode is substantially reduced or the anode is worn up to the steel core.
The guarantee shall not be valid if the anode is not regularly inspected.
In case of malfunctions, do not try to fix the tank by yourself. Call your nearest service
provider.
12