hanseatic BCD 310CA2W Gebrauchsanleitung Seite 51

3. Carefully push back the blanking plates
on the top door using a Phillips screw-
driver, lift off and store in a safe place.
B
a
4. Loosen both screws a on the top hinge,
remove and store in a safe place.
5. Push the hinge along with the door
inwards slightly, remove door and set
aside.
6. Loosen and remove third screw b.
7. Tilt the top hinge slightly to remove it
from the door.
8. Open the bottom door.
Getting started
9. Remove washer and store in a safe
place.
10. Loosen and remove both screws.
11. Lift door and while doing so, pull it off the
bottom hinge and carefully set aside.
12. Removing hinges.
13. Place a strong piece of string around the
blanking plugs, move the taut string back
and forth to lift out the blanking plugs.
Insert the blanking plugs into the vacant
space.
14. Tilt appliance backwards slightly and
lean against a wall.
15. Unscrew both adjusting feet.
16. Unscrew the bottom hinge.
17. Screw the bottom hinge onto the new
hinge side.
18. Screw-in both adjusting feet.
Seite GB-21