Memory Function - Gima 6475 Gebrauchsanweisung

9
USING THE SCALE:
1 These scales run on 2pcs of replaceable lithium
batteries. Remove the protective film before
use (Fig. 1).
2 Before weighing a baby, snap the tray
to the measuring surface so the tray would stand
stable (Fig. 2).
3 There is no need for installing the tray if you want
to weight a child.
4 By pressing the ON/OFF button once "0.00"
appears on the display (Fig.3).
5 Place the baby or stand the child on the scale.
The measured weight is going to be displayed
in a few seconds, and stored in the memory
automatically. An "M" is displayed indicating
the presence of data in the memory. After the next
weighing the screen displays the measured weight
and the difference between the measured weight
and the previous weight by turns of 2 seconds.
The lastly measured weight is automatically stored
in the memory in case of both manual and automatic
switching off.
6 By pressing the ON/OFF button once, the scale switches off.
By not using the scale for 30 seconds it switches off automatically.

MEMORY FUNCTION

After switching on the scale, an "M" is dispalyed which means that the last
measured weight is stored in the memory, so that the weigh difference could
be displayed. If you don't need the weight difference to be shown, then
by pressing the TARE button for 3 seconds the memory can be deleted.
"M" will disappear from the display. If you take out the batteries, then the
memory will also be deleted.
ABOUT TARING
If you use not only the tray and the added weight (blanket, pillow etc.)
is lighter than 5 kg, after pressing the TARE button the screen displays "0.00"
and the maximal measurable weight will be 20 kg.
If the added weight is heavier than 5 kg, after pressing the TARE button
the screen displays "0.00" but the maximal measurable weight will be less
than 20 kg (more precisely: 20 kg minus the added weight).
ENGLISH