Hach NA5600 sc Na+ Installation Seite 3

Table of contents
Specifications on page 3
Safety information on page 6
Product overview on page 7
Items to collect on page 10
Installation guidelines on page 10
Mechanical installation on page 11
Electrode installation on page 12
Electrical installation on page 15
Plumbing on page 26
Install the analyzer bottles
Specifications
Specifications are subject to change without notice.
Specification
Dimensions (W x H x D)
Enclosure
Weight
Mounting
Protection class
Pollution degree
Installation category
Power requirements
Operating temperature
Operating humidity
Storage temperature
Number of sample streams 1, 2 or 4 with programmable sequence
Analog outputs
on page 32
Table 1 General specifications
Details
Analyzer with enclosure: 45.2 x 68.1 x 33.5 cm (17.8 x 26.8 x 13.2 in.)
Analyzer without enclosure: 45.2 x 68.1 x 25.4 cm (17.8 x 26.8 x 10.0 in.)
Analyzer with enclosure: NEMA 4/IP65
Analyzer without enclosure: IP65, PCBA housing
Materials: Polyol case, PC door, PC hinges and latches, 304/316 SST hardware
Analyzer with enclosure: 20 kg (44.1 lb) with empty bottles, 21.55 kg (47.51 lb) with
full bottles
Analyzer without enclosure: 14 kg (30.9 lb) with empty bottles, 15.55 kg (34.28 lb)
with full bottles
Analyzer with enclosure: wall, panel or table
Analyzer without enclosure: panel
1
2
II
100 to 240 VAC, 50/60 Hz, ± 10%; 0.5 A nominal, 1.0 A maximum; 80 VA maximum
5 to 50 °C (41 to 122 °F)
10% to 80% relative humidity, non-condensing
-20 to 60 °C (-4 to 140 °F)
Six isolated; 0-20 mA or 4-20 mA; load impedance: 600 Ω maximum
Connection: 0.644 to 1.29 mm
20 AWG) recommended, twisted pair shielded wire
2
(24 to 16 AWG) wire; 0.644 to 0.812 mm
2
(24 to
English 3