THOMSON DSC 525W Bedienungsanleitung Seite 40

D - CONFIGURATION AND USE
1
Open an external video file
Quick scroll forward
2
Quick scroll back
3
Playback
Stop playback
4
controls
Progress image by image
5
Start playback
6
Pause
7
Current operating day: the coloured time
8
intervals indicate the presence of videos and
their approximate start and end times
List of cameras to search: tick the cameras
9
with recordings you wish to view
Viewing windows: double-click to display
10
one or more windows and cameras
simultaneously
Take a photo from the video in playback
11
and activate/deactivate sound
Type of trigger: tick the type of recordings
12
you want to search: flat (programmed),
manual, upon movement detection, by alert
in general
Day you want to view
13
Position: enter the precise time from which
14
you want to view the video
To search for a video and view it:
• Click the list of cameras on the top right of the
screen or on the cameras that you wish to view.
"type d'enregistrements [type of
• In the
recording]"
area,
recordings that you are searching for
• In the "date d'enregistrement [date of
recording]" area, indicate the day you want to
view
• Click "Recherche [Search]": each camera
is listed at the bottom of the screen. The
coloured areas correspond to the videos in the
computer memory:
• At the bottom of the screen, click the cameras
for which you would like to display the videos
• Use the playback controls to play, fast forward,
rewind or use the "Positionner [Position]" area
to indicate the precise time with the cursor.
16
EN
u . e i t y u r e c n s s o m o t h w . w w
indicate the type
MOTORISED 1080P IP WIFI CAMERA
To program an alert to be sent when movement is
detected, you need 2 email addresses: the address
of the sender which will be used by the camera,
and the address which will receive the alerts. The
camera uses the username and password of the
sender address to connect and send the email.
Configuration depends on the chosen email
provider's settings.
Note: the 2 email addresses can be the same (you
will simply be sending an email to yourself)
In our example, we use www.gmail.com:
sender-address@gmail.com
recipient@gmail.com receives the alerts. Both
addresses need to have been created beforehand.
To program email alerts for movement detection,
right click a camera in the list at the top right
of the main screen or on the screen image, then
select "Paramètres caméra [Camera settings]". Then
go to "Réseau [Network]", "Paramètres messagerie
[Message settings]":
of
1
Tick the "Activer [Activate]" box to activate
email sending
SMTP server: depends on the email provider
2
of address that sends the alert. In our
example, using Gmail, smtp.gmail.com
SMTP port: varies with the email provider
3
of the address sending the alert. In our
example using gmail, 465
Security: security when connected to the
4
email provider. In our example using Gmail,
TLS
sends the alerts,
1 2 3 4 5 6
7 8 9