THOMSON DSC-725S Bedienungsanleitung Seite 42

d - CONFigurATiON ANd uSE
When a camera displays its image on the screen,
additional commands are displayed in the bottom
right corner:
1 2 3
This icon shows the presence of records on
1
the computer used (white when idle, green
when programmed/on
records are created)
Broadcast stopped and image closed
2
Start a recording on the disk of the computer
3
used*
Activation/deactivation
4
microphone (cameras fitted with the microphone
only, your computer must provide the speakers)
Take a photo and store on the disk of the
5
computer used*
Activation/deactivation of the camera speaker
6
(cameras fitted with the speaker only, your
computer must provide a microphone)
* For the save and capture functions to be
accessible, the disk to use must be set beforehand.
Click on the System settings icon
software where to save the photos and videos on
the computer hard drive.
To view videos saved on the computer, client on the
Video playback icon
10 11
1 2 3 4 5
16
en
4 5
detection/manual
of the camera
to tell the
:
6 7 8 14 13 12
OutdOOr 1080p Ip WI-FI camera
1
2
3
Playback
controls
4
6
5
6
7
Current operating day: the coloured time
8
intervals indicate the presence of videos and
their approximate start and end times
List of cameras to search: tick the cameras
9
with recordings you wish to view
Viewing windows: double-click to display one
10
or more windows and cameras simultaneously
Take a photo from the video in playback and
11
activate/deactivate sound
Type of trigger: tick the type of recordings you
12
want to search: flat (programmed), manual,
upon motion detection, by alert in general
Day you want to view
13
Position: enter the precise time from which
14
you want to view the video
To search for a video and view it:
• Click on the list of cameras on the top right of
the screen or on the cameras that you wish to
view.
• In the "type
of recording]" area, indicate the type of
recordings that you are searching for
• In the "date d'enregistrement [date of
9
recording]" area, indicate the day you want to
view
• Click "Recherche [Search]": each camera is
listed at the bottom of the screen. The coloured
areas correspond to the videos in the computer
memory:
• At the bottom of the screen, click on the
cameras for which you would like to display the
videos
• Use the playback controls to play, fast forward,
rewind or use the "Positionner [Position]"
area to indicate the precise time with the
cursor.
open an external video file
Quick scroll forward
Quick scroll back
Stop playback
Progress image by image
Start playback
Pause
d'enregistrements [type