Introduction; Personal Settings; Technical Specifications - Auping AVS 478 Gebrauchsanweisung

1. Introduction

This user manual contains important
information. We therefore suggest
that you keep it stored in a safe place.
We congratulate you on having chosen
an AVS mesh base that fulfills all your
personal
bases
adjustability, according to type. The
mattresses vary in terms of the use of
materials and functions.
The AVS mesh base is equipped with
Comfortslides
levels. These slides can be used to
adapt the degree of firmness of the
mesh to that of your body. The mesh
base therefore offers good support and
comfort.
Thanks to their open structure, AVS
mesh bases offer good ventilation,
resulting in a fresh and hygienic
sleeping environment.
All Auping mattresses can be used on
non-adjustable or adjustable AVS mesh
bases.
comfort zones which result in individual
adaptation to the weight distribution of
your body. The shoulder zone is slightly
softer, while the seat section in contrast
contains extra reinforcement. This
manner of zoning provides additional
comfort and improved support, both
when sitting and lying on the mattress.
Thanks to the smooth fabric, the base
of the mattress glides smoothly over
the back section of the mesh base
during adjustment.
_0DSGG_5936 BW.pdf - pag.15
requirements. The
have varying degrees
at shoulder and hip
®
The mattresses comprise
LET OP !!! Lage resolutie!
Mattress connectors are used to attach
the mattress to the mesh base. This
prevents the mattress from sliding
downward while adjusting the bed, at
the same
effortlessly follows the movements of
mesh the mesh base. The mattresses are
of asymmetrically
materials, and therefore need not be
turned over.

1.1 Personal settings

The Comfortslide
adjust the mesh base to the shape of
your body. People with broad shoulders
and/or hips, should move the relevant
slides outwards. Those with slim
shoulders and/or hips should slide
them inwards.

1.2 Technical specifications

Control box:
- Input 230 V AC, 50Hz
(or 220/240/110 V AC, 50/60 Hz
depending on the modell).
Drive motor:
- Leg, neck and back motor: 24 V DC
Maximum continuous operating time 2
minutes per 20 minutes (2 minutes on,
18 minutes off).
Remote control with cable
- Coiled flexible cable 24 V.
or
RF remote control
- 3 Volt cordless RF handset;
- 2 AAA batteries.
time ensuring that
built using various
can be used to
®
EN
it
2
January 30, 2012