Chapter 1 General Standards; Chapter 2 Purposes / Intentions; Chapter 3 Preparation Page - Columbus AKS 80|BM 108 Original Bedienungsanleitung

Kehrsaugmaschine
AKS 80|BM 108
READ THIS INSTRUCTIONS MANUAL CAREFULLY BEFORE USING THE MACHINE.
"columbus" WILL NOT BE HELD LIABLE FOR DAMAGE TO PROPERTY AND/OR PEOPLE DERIVING FROM FAILURE TO OBSERVE THE
STANDARDS LISTED IN THIS MANUAL OR BY IRREGULAR AND/OR IMPROPER USE OF THE MACHINE.
ALL OF THE INSTRUMENTS REQUIRED FOR PERSONAL PROTECTION (GLOVES, MASKS, GLASSES, WHITE LENSES, KEYS AND
FOR FURTHER REFERENCE ALWAYS KEEP THIS MANUAL ON HAND (IF MISPLACED, PROMPTLY REQUEST A COPY FROM YOUR RE-
THE COMPANY "columbus" WE RESERVE THE RIGHT TO MAKE CHANGES OR IMPROVEMENTS TO MACHINES OF OUR
PRODUCTION, WITHOUT THE BEING REQUIRED TO UPDATE PREVIOUSLY-SOLD MACHINES.
ALL SWEEPERS "columbus" COMPLY WITH EC STANDARDS AND ARE LABELLED:
"columbus" is pleased to make you the new owner of a AKS 80|BM 108 series sweeper.
By observing the instructions provided below, we are certain you will be able to fully appreciate the operating possibilities offered
by AKS 80|BM 108.
This instructions manual is supplied to instruct and define the purposes and intentions that the machine was designed for and its
safe use, as clearly as possible.
You will also find a list of all of those minor operations required to keep AKS 80|BM 108 in good running order and safe.
Procedures that can easily be carried out by anyone.
Always seek the assistance of specialised staff for unscheduled maintenance.
You will find information on hazards and residual risks, i.e. all of those risks that cannot be eliminated, plus adequate information
on allowed and forbidden uses; instructions on how to commission AKS 80|BM 108, technical instructions and allowed
performance; instructions on how to operate AKS 80|BM 108 and its maintenance; instructions on how to decommission the
machine, and dismantle or demolish it.
Once the external packaging has been removed, take the machine off of its pallet; this operation can be carried out in two ways:
3) Use a three-pronged hook with a suitable capacity for the weight of the machine (provided on the CE plate). Lift the motor
hood until it is resting on the steering wheel, all the way open. Screw the eye-bolt all the way into the threaded hole on the
platform by first of all taking the casing off of the motor (Part. 7 Fig. 4). Hook all of
the prongs onto the lifting hooks (all three) marked as A/B/C in Fig. 1 and using a forklift or bridge crane (with a suitable
capacity for the machine), lift it off of the pallet and very slowly place it on the ground.
___________________________________________________________________________________________
TOOLS) MUST BE SUPPLIED BY THE USER.
TO FIND A TOPIC, CONSULT THE TABLE OF CONTENTS
SELLER).
dB
19
CHAPTER 1 – GENERAL STANDARDS
CHAPTER 2 - PURPOSES / INTENTIONS
CHAPTER 3 - PREPARATION (UNPACKING)